Roof slopes are necessary to keep water out of your home because they direct water from your roof and into your gutters. A lot of people don’t know how important roof valleys are for their roof and gutter system, so they might not take care of them when they’re doing their other normal roof and gutter maintenance.
Duravex Roofing Group’s valley replacement service can fix or replace valleys that are rusted, bent, blocked, or otherwise broken and leaky. Valley trays are put on top of wooden supports that are placed at the low point of a roof where two slopes meet. They collect water from the roof and send it to the gutters, making them an important part of the roof’s draining system. Roof’s method for drainage. It can be very bad if your slopes are broken or not working right. This can cause leaks and water damage. As pros, the staff at Duravex Roofing Group want to stress how important it is to have a good roof valley system. For roof slopes to rust over time, they need to be exposed to the elements and wear down over time. Bad weather can also damage them.
Rust Converter or Remover: RUSTED VALLEYS AND GUTTERS AREA
Premium Rust Converter/Rase Remover: A water-based treatment for rust that needs to be done before painting. To remove rust from metal, you need to use a very strong acid solution. Chemicals in rust converters change rust into a black substance that can be painted over. based on water and safe for use. Rust is taken care of on the surface, and water-based or acrylic paint can be used to cover it up.
How do you do Valley Replacement?
When you restore or fix broken or damaged valleys on your roof, this is called valley replacement. Valleys can be damaged in a number of ways. Being exposed to air, water, and other elements can cause them to rust and eventually corrode completely. The buildup of leaf and green debris speeds up the rusting process and also blocks the flow of water in valleys. Finally, the wooden supports below the valleys can fail, which can cause weak spots and bends in the valleys. Any damage to the valleys can let water overflow or leak straight into the roof, doing a lot of damage like rotting wood and losing insulation.
To replace a valley, our skilled and experienced roofers will carefully take off the tiles and valley cuts around it, then take off and get rid of the leaky valley. Then, we’ll bring you a new valley tray that is the right size and shape and put it in place. Finally, we’ll put back all the tiles that were damaged, including the small valley cuts, which will be held in place with clips in line with Australian Standards. We only use the best products to make sure that your new valley will last a long time.
The first step in replacing a valley is to carefully look over your roof. It will be very important for our team to carefully check your valleys for damage or other issues that might be causing issues. Once we know which caves need to be fixed or replaced, we will use special tools and methods to carefully remove the old ones.
The water that hits the roof has greater difficulty getting where it needs to go when this happens. This means that water can get in through the walls and any cracks in the house. Besides that, the water can wear away at the roofing materials and do a lot of damage to the roof’s structure.
There are times when these fixes are very expensive and take a lot of time and work. Not to mention the cost of fixing water damage or mould. If a homeowner hasn’t had their home checked for possible roof valley damage lately, they should call The Duravex Roofing Group to set up an inspection or evaluation of their roof’s current state.
Please Note: The valleys of the roof may also be checked as part of a regular roof care check and inspection.