Description

Please note, that all Pool Paints are factory tinted for colour consistency and will take 5-6 business days to order in your selected colour. Delivery times can vary from 10-12 days on Pool Paint orders.

2K EPOXY CONCRETE COATING

NuPool is a high build, two-component gloss epoxy coating that is impervious to water and moisture and is suitable for use as a quality swimming pool coating for new concrete pools, or re-coating aged 2K epoxy coated pools. This two pack pool paint is long wearing and can be used in conjunction with Nutech Anti-Slip.

NUPOOL FEATURES

• Resistant to salt water and pool chlorination chemicals
• Algae Controlled
• Durable
• Safe for fish and mammals
• Easy to maintain
• Brush or roller application
• 13 standard colours
• Colour matching available

APPLICATION

EQUIPMENT & TOOLS

Brush or Roller

Pressure washer and vacuum cleaner

Drop sheets, cardboard or old tarpsÌ_åÇÌÎÌ__

PREPARATION

• Degrease the entire pool with Nu-EcoSafe High Strength Degreaser
• Pressure clean the entire pool with a >2000psi pressure washer
• Ensure all stains, oil and chemical residue is removed. Repeat cleaning process if needed
• For bare concrete, etch the surface using Nu-EcoSafe Etch and rinse well
• For old or existing 2K epoxy surfaces, sand or abrade the entire surface
• Make any spot repairs to cracks or chips
• Vacuum the entire pool with a soft bristle head. Ensure that all debris has been removed
• Create a safe mixing area near the pool with drop sheets, tarps or cardboard

COAT ONE

• Mix the first coat of NuPool using the 3:1 ratio (2-part kit) by adding NuPool Part B into NuPool Part A
• Mix the 2 parts together throughly using a drill mixer
• Add EPiC Epoxy 500 Thinner (approx 20%) and mix again
• Allow the paint to stand for 10 minutes before application
• Use a brush to cut in all edges and corners with NuPool, then roll to cover the surface
• Allow to dry for 5 hours (temperature dependant), before applying the second coat
• DO NOT wait more that 48 hours before applying a second coat

COAT TWO

• Mix the second coat of NuPool using the 3:1 ratio (2-part kit) by adding NuPool Part B into NuPool Part A
• Mix the 2 parts together throughly using a drill mixer
• Allow the paint to stand for 10 minutes before application
• Use a brush to cut in all edges and corners with NuPool, then roll to cover the surface
• Allow to dry for 5 hours (temperature dependant)

NON-SLIP

• To create a non-slip surface, apply Nutech Coarse Anti-Slip to the second coat while it is still wet
• If anti-slip has been applied, use a third coat of NuPool over the areas

CURING

NuPool takes 7 days to completely cure into a hard and durable surface. During this time, the pool must be kept dry. If the surface becomes wet, remove all water and allow to continue curing.