Description

CLEAR SEALER FOR AGGREGATE AND CONCRETE SURFACES

Agreseal‰ۡóÁí£̴å¢ concrete and aggregate sealer is a ready to use clear glaze specifically formulated to seal and protect decorative exposed aggregate concrete surfaces and to improve concrete surface performance and appearance.

Agreseal is a penetrating non-yellowing glossy wet look sealer, recommended as a two coats system to provide a durable surface ideal for pedestrian and vehicle traffic. Agreseal provides an attractive finish for new and old exposed aggregate surfaces.

APPLICATION AND FEATURES

Agreseal is manufactured from Acrylic Polymer Resins in a solvent base, designed to assist surface impregnation and is specifically formulated for exposed aggregate concrete. Agreseal is highly durable and resistant to oil and most household chemicals excluding petrol and solvents (please refer to Nutech PaveCoatí«̴å PR100 and PR 210 petrol resistant sealers)

Agreseal can also be used as a decorative and protective coating system on a wide range of concrete paving and building applications excluding clay and terracotta bricks and tiles. Agreseal provides excellent adhesion, weather and waterproofing protection and a hard wearing surface.

Designed as a two coat system, Agreseal provides excellent protection against fading and powdering of oxide colours, staining and marking due to contaminants including foodstuffs, oil and grease.

BENEFITS

• Improves surface performance of the concrete
• Enhances concrete and aggregate colours
• Helps protect against freeze/thaw damage
• Protects against most stains and many household chemicals
• Repels grease, oil and water
• Non-yellowing glossy wet look after two coats
• Low maintenance and improves cleaning
• Non yellowing and resistant to discolouration
• Easily recoated

APPLICATION DIRECTIONS

Refer to the Agreseal Material Safety Data Sheet and the Nutech Concrete Sealer Application Guidelines for the complete product and safety information before using Agreseal. Agreseal is highly flammable and skin and eye contact must be avoided. Ensure adequate ventilation at all times. Seek immediate medical advice if safety or health issues arise. Application by broom, roller, brush or spray is recommended subject to suitable surface preparation.