Description

WATER BASED NON-TOXIC PAINT REMOVER SUITABLE FOR HIGH PERFORMANCE COATINGS

Nu EcoSafe Strip High Performance Stripper is proven to effectively lift:

• Highly cross-linked urethanes
• Epoxy topcoats and primers
• Alkyd paints and varnish
• Non-skid coatings (100% solid content)
• The toughest of industrial coatings and linings from metallic and plastic substrates
• Capable of lifting fuel resistant primers and coal tar epoxies.

WILL REMOVE THESE COATING FROM ALL TYPES OF SUBSTRATES INCLUDING:

• Steel
• Aluminium
• Metal alloys
• Concrete
• Masonry

NU ECOSAFE STRIP HIGH PERFORMANCE STRIPPER IS EFFECTIVE AT THE FOLLOWING PROJECTS:

• Petrochemical plants
• Chemical tank farms
• Bridges
• Shipyard and docks
• Ballast tanks of ships
• Pulp and paper mills
• Automobiles and engine parts
• Railway cars and engines
• Wrought iron/cast iron work
• Any area where abrasive blasting is not an option for environmental, or economic reasons
• Any area where worker safety may be a concern.

NU ECOSAFE STRIP HIGH PERFORMANCE STRIPPER HAS THE FOLLOWING QUALITIES:

• Water-based
• Fully biodegradable
• Non-flammable
• Contains no TAPs or HAPs (Toxic/Hazardous Air Pollutants)
• Non-carcinogenic
• Easy clean up with running water
• Low VOCs
• Non ozone depleting
• Not regulated by authorities for transportation/storage
• Not regulated by authorities for worker health and safety
• Low odour
• Will not burn skin

ADDITIONAL BENEFITS THAT CONTRIBUTE TO COST EFFECTIVENESS:

• Requires much less chemical to achieve desired results
• Reduces man-hours and effort required to complete a project
• Reduces cost of waste disposal
• Reduces down time since other work at site can continue while stripper does its job
• Lowers insurance costs for storage hazards.

APPLICATIONS & FEATURES

EQUIPMENT & TOOLS

This product is engineered for spray or brush application.

Airless sprayers are recommended. Use only airless equipment with chemical resistant packing, that has an output of 2 L/min and can produce a pressure of 2500 psi. A typical medium size airless sprayer is capable of spraying this product. Equip the sprayer with a tip size of 0.019 inches or larger. (Example: a 519 or 425 tip).

Other equipment: brushes, rollers, scraper, masking tape, plastic (polyethylene) sheet, pressure washer, electric drill with mixer, empty pails for clean-up, running water, rags. Roller application should be used only for horizontal surfaces.